Influence of lanthanum on enhancement of mechanical and electrical properties of Cu-Al_2O_3 composites

Two kinds of Cu-Al_2O_3 composites(with and without La) were prepared via mechanical alloying-spark plasma sintering(MA-SPS) method. Microstructure, mechanical properties and electrical resistivity were investigated systematically using metallography, scanning electron microscopy, transmission electron microscopy, mechanical and electrical properties testing. The results indicate that an appropriate amount of La can homogenize the distribution of Al_2O_3. As such, yield strength, ultimate tensile strength and elongation of Cu-Al_2O_3-La are greatly increased. Some semi-coherent interface between Cu and Al_2O_3 is found, which means a low interface energy. The grain shape of Cu changes to irregular band with the addition of La. This change results in a density decrease of grain boundary and reduces electrical resistance. Lanthanum may exist in the form of La_2O_3.     

Structure and electrical properties of Zn-doped BiFeO3 films

BiFe_1−xZn_xO₃ (x = 0, 0.5, 1, 1.5, 2 mol%) (BFZO) films were prepared on ITO/glass substrates by a sol-gel method. The effects of different Zn contents on the structures and electrical properties of the BFZO films were investigated. From X-ray diffraction (XRD), microstructure and X-ray spectroscopy (XPS) results, the BFZO films with a Zn content of 1 mol% showed a better crystal structure and grain development, and the Fe²⁺ and oxygen vacancy concentrations in this sample were the lowest among all the evaluated BFZO films. The P-E hysteresis loop indicated that the BFZO films with 1 mol% Zn had the highest remanent polarization (2Pr), which was 82.4 μC/cm², along with a coercive field (2E_c) of 887 kV/cm at the tested electric field of 857 kV/cm. The BFZO film with 1 mol% Zn had the lowest leakage current density, which was 3.54 × 10⁻⁷ A/cm² at the tested electric field of 200 kV/cm. Both at high and low electric fields, the space charge-limited current (SCLC) conduction mechanism was the main leakage mechanism. When the test frequency was 10⁵ Hz, the dielectric constant was 133, and the dissipation factor was 0.015.     

Low dielectric constant polyimide mixtures fabricated by polyimide matrix and polyimide microsphere fillers

Polyimide microspheres were prepared via non‐aqueous emulsion polymerization by using pyromellitic dianhydride (PMDA) as anhydride monomer and 2,2‐bis(4‐(4‐aminophenoxy)phenyl)propane as amine monomer. The polyimide microspheres were well characterized by Fourier transform infrared spectroscopy, SEM and laser particle size analyzer. They were spherical in shape and monodisperse and their size was 31–33 μm. Polyimide mixtures formed by polyimide microspheres as fillers and polyimide composed of pyromellitic and dianhydride 4,4′‐oxydianiline (ODA) as matrix were investigated with regard to thermal properties, dielectric properties and mechanical properties. With 10%–50% polyimide microspheres in the polyimide mixtures, the dielectric constants were 2.26–2.48 (1 MHz) and the loss tangents were 0.00663–0.00857 (1 MHz), which were both significantly lower than the values for ODA‐PMDA polyimide. The decomposition temperature and glass transition temperature were above 440 and 290 °C. The polyimide mixtures possessed excellent thermal resistance. When the percentage of polyimide microsphere addition was 30%, the polyimide mixtures had the largest tensile strength (128.50 MPa) and elongation at break (9.01%). These results indicate that the polyimide microspheres were used as both low dielectric fillers and reinforcing fillers. © 2020 Society of Chemical Industry     

故宫养心殿电气基础设施改造技术研究

为实现故宫博物院的高水平保护利用和可持续发展,笔者对故宫进行了现场勘查,指出了故宫养心殿现实存在的问题和实际需求,通过分析资料,并结合故宫基础设施改造中的关键技术,从施工工艺的角度对故宫电气基础设施改造的具体方法提出了一些可行的方法,以期为国内相关领域的研究提供参考。     

一种相位测试用曲口面天线的设计与应用

相位测试技术可满足不同外形天线罩的在线测试需求。通过数值仿真,设计最佳变换曲线完成矩形 传输波导与圆形辐射天线的拟合连接,能够有效降低天线驻波比,实现测试探头的高增益收发,提升测试有效性。 在维持驻波比参数前提下,对天线口面弧线给予二次曲率调整,可以适应不同外形天线罩的测试稳定性要求。根据 仿真结果加工的低驻波比反射相位测试天线,已应用于多个型号天线罩成型中的相位在线测试,提高了监控的有效 性,验证了设计仿真结果的正确性。     

Pressureless sintering and properties of boron carbide composite materials

Boron carbide and Tantalum boride composites were prepared by pressureless sintering of B₄C with addition of TaC powder. The effect of TaC addition on the sinterability of boron carbide was studied. High densified ceramic with a relative density of 98.7% was obtained at sintering temperature of 2250°C. The composition and the microstructure of the dense composites are characterized by means of x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive x-ray spectroscopy (EDX). The studies show that the composites contain boron carbide, TaB₂, and carbon phases with a homogeneous structure. In addition, the correlation between the composition and the electrical conductivity was investigated. The electrical conductivity of the composite increased with increasing addition of TaC, and a change in conduction behavior from semiconducting to metallic was observed. High hardness value of 28.49 ± 1.33 GPa was obtained by the sample with 30 wt% TaC addition.     

Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of 7050 alloy were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), selected area electron diffraction (SAED), hardness and electrical conductivity tests. Results show that after quenching in different ways, electrical conductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural aging state is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, the size of GP zones is 1.8–2.6 nm in matrix of the immersion quenched sample and it is 1.4–1.8 nm in matrix of both water mist and forced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 and its electrical conductivity is 30.5% (IACS) which are both higher than those of the immersion quenched sample. Therefore, water mist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.     

Electrical oscillation generation with current-induced resistivity switching in VO2 micro-channel devices

We report large amplitude modulation waveforms as large as ~ 10 V using vanadium dioxide micro-channel devices operating under current-controlled conditions. The self-sustained electrical oscillations were generated by controlling the applied current in the negative differential resistance region of the investigated devices. An appropriate value of internal capacitance was achieved as parasitic capacitance in the device structure to stabilize the electrical oscillations. This eliminates the need of an external pulsed source or any external passive component connected to the micro-channel devices. Amplitude and frequency of the oscillation were tuned by illuminating the device micro-channel with an external laser. An equivalent circuit model was developed to simulate the waveforms. A good agreement between experiment and simulation was verified.     

An up to date review of continuously variable speed wind turbines with mechatronic variable transmissions

As a promising and potential alternative to conventional fixed or variable speed wind turbines, continuously variable speed wind turbines (CVSWTs) with variable transmissions offer improved power efficiency and enhanced power control capabilities. The CVSWTs can be generally achieved by adapting mechatronic variable transmissions in the turbine drive train for continuously variable speed operations for wind turbines. Therefore, this paper serves to provide an up to date and exhaustive review of the CVSWTs with mechatronic variable transmissions such as mechanical variable transmission, electrical variable transmission, and power splitting transmission. In this paper, the analysis of CVSWTs with different mechatronic transmission topologies is performed regarding basic configurations, dynamic characteristics, control principles, and experimental or simulation results. Review results indicate the feasibility of applying CVSWTs with such mechatronic transmissions and highlight superiorities of the CVSWTs with power splitting transmission. The CVSWT with power splitting transmission will be particularly suitable for megawatt‐scale turbine systems and will hence increase the economic competitiveness of these turbines due to its large power capacity and high reliability. The directions or challenges for future investigations of CVSWTs with such mechatronic transmissions are also presented to foster in‐depth understanding of such CVSWTs and their control strategies.     

基于多层感知器的气液两相流流型识别方法

通过对电阻层析成像数据采集原理和深度学习网络的研究,提出了一种基于阵列电阻值和多层感知器深度学习网络相结合的流型识别方法。利用电阻层析成像系统中的16个电极传感器来获取流型样本数据,并构建出流型识别数据库,然后对多层感知器深度学习网络进行训练,获得可以识别不同流型的网络。实验结果表明,采用阵列电阻值结合多层感知器网络对流型进行学习和识别的方法,流型识别准确率可以达到95%,解决了流型图像生成过程与数据特征预选过程中流型特征损失的问题,流型识别性能得到了提高。